Compact rod seal designed for VEEPAC grooves and high pressure applications. The multi-lip elastomer sealing element is supported by a fiber-reinforced back with an integrated Back-up Ring.
The rod seal range has been designed to meet the needs of hydraulic equipment operating at high pressures and subjected to severe loading and vibration conditions. The main sealing element is manufactured in a highly
compression-set resistant nitrile. The most important quality of this element is the design of the multiple sealing lips for maximum sealing efficiency and end face configuration, which ensures that the Selemaster can tolerate vibrations and severe misalignment.
The support ring is made in cotton fabric reinforced nitrile elastomer; the “u“ shape is energized when pressure is
applied. The last element is the anti-extrusion ring, manufactured in PoM.
1) PoM anti-extrusion ring
2) Support ring in cotton fabric reinforced nitrile, nbr 80 Shore a
3) Sealing element in nitrile, nbr 80 Shore a
Pressure: up to 70 MPa
Velocity: up to 0.5 m/s
Temperature: -40 °C to +130 °C
Media: Hydraulic fluids Mineral oil-based hydraulic fluids, water and water/glycol emulsions
Groove Type: open
- High sealing efficiency
- effective sealing during vibration and shock loading
- extrusion resistance at high pressure