Our web site links are listed as a convenience for our visitors. We carefully review every site. Our goal is to present valuable resources. If you use these links, we take no responsibility and give no guarantees, warranties or representations, implied or otherwise, for the content or accuracy of these

third-party sites. 

 

perma News

01/10/2014 - perma FLEX - NEW

perma FLEX – The all-in-one lubrication system in two compact sizes 
EUERDORF. The basic requirement for long bearing and chain service life is optimum lubrication. Incorrect lubrication results in damages and equipment breakdown. The new all-in-one lubrication system perma FLEX from perma-tec provides reliable 24 hour, year round lubrication for all types of industries and applications.
 

 

 

 

01/10/2012 - perma FLEX - NEW

 

perma FLEX – The all-in-one lubrication system in two compact sizes

EUERDORF. The basic requirement for long bearing and chain service life is optimum lubrication. Incorrect lubrication results in damages and equipment breakdown. The new all-in-one lubrication system perma FLEX from perma-tec provides reliable 24 hour, year round lubrication for all types of industries and applications.

Ready to go
perma FLEX is supplied read to use and requires no assembly or special tools. Just unpack, turn the rotary switch to the desired discharge period and screw into your lubrication point. The discharge period (in monthly steps of 1 to 12 months) can be changed anytime after activation. During longer machine downtimes, perma FLEX can be completely turned off and can be reactivated when the machines are up again. This flexibility makes perma FLEX ideal for the different requirements of your lubrication points.

The two sizes are perfect for small or tight spaces (size 125 cm³ = 117 mm high / size 60 cm³ = 85 mm high) and the transparent housing makes it easy for users to monitor the position of the lubricant delivery piston.

perma FLEX makes preventive maintenance practices easier and safer. Longer maintenance intervals and remote mounting significantly reduces the interface between maintenance staff and dangerous operating equipment. This increases workplace safety and is more cost effective.

Tried, tested, and proven
The system was successfully tested in the market. This practical experience shows that perma FLEX can be used on all applications that require reliable and optimum relubrication, e.g. on bearings, chains, sliding guides, open gears, gear racks, shaft seals and more. The system is extremely flexible and can even be mounted up-side-down. It performs reliably in extremely moist and dirty areas (protection class IP 68) and in hot and cold environments (-20 °C to +60 °C).


Service included
To ensure that perma FLEX matches all the requirements of your lubrication point, perma-tec offers the largest range of lubricants and accessories in the market of automatic lubrication systems. If you have any questions, our team of application engineers will be glad to help.

 

Newsarchiv

 

11/24/2010 - perma-tec GmbH & Co. KG

 

perma-tec has been providing innovative and creative lubrication solutions for more than 45 years. Our single- and multi-point lubrication systems can be found in all types of industries and applications around the world.
perma-tec´s leadership in single-point lubrication is based on many patents and specially certified products. All perma products meet “Made in Germany” quality standards because they are developed, tested and manufactured at our German headquarters.
Because of our marketing know-how and a network of subsidiaries and competent partners around the world we are able to provide lubrication solutions that meet the highest technical requirements.
Our product range includes single-point and multi-point lubrication systems with electrochemical or electromechanical drives which can be operated in temperatures between -25°C and +60°C. Customers can choose between simple low-cost systems and high-tech solutions that can lubricate up to 600 lube-points.

perma lubrication systems meet your needs and the individual lubrication requirements of your equipment:

  1. Discharge periods can be set from 1 day to 24 months
  2. Lubricant cartridges are available in different sizes
  3. All types of lubricants and custom fillings can be ordered
  4. Choose between self-contained and PLC controlled systems
  5. Fast, robust and practical installations for all lube-points with our wide range of mounting systems, accessories and connection parts
  6. Special mounting and starter sets for easy initial installation
  7. Superior technical support and advice from a competent partner
  8. Customized solutions for challenging applications
  9. xtensive literature available in various languages

perma lubrication systems are ideal for applications that require-trouble free operation, safety, hygiene, and economic efficiency: Electric motors, escalators, drive and transport chains, transport systems, pumps and blowers which require lubrication on roller and sliding bearings, sliding guides, linear guides, open gears, gear racks, spindles, shaft seals and chains. Today, perma lubrication systems are used in every industry worldwide.

Lubrication without the need to stop production reduces downtime and increases productivity, resulting in cost reduction. Remote mounted lubrication systems are safe and easy to access. They minimize the interface between maintenance staff and dangerous operating equipment – a key element of occupational safety. At the same time, perma lubrication systems are more economical than manual lubrication practices as system exchanges can be planned to take place during regular plant shutdowns.

 

11/24/2010 - Workplace Safety

 

The "hands-off, brains-on" approach to the lubrication of bearings and chains improves preventative maintenance practices and reduces accidents. Remote mounted lubrication systems are safe and easy to access. They minimize the interface between maintenance staff and dangerous operating equipment – a key element of occupational safety. At the same time, perma lubrication systems are more economical than manual lubrication practices as system exchanges can be planned to take place during regular plant shutdowns.

A conveyor pulley bearing for instance, can easily be lubricated if the lubrication system is mounted away from the bearing. This makes it possible to exchange the lubrication system safely even while the machine is running. There are many more dangerous applications where perma lubrication systems will reduce the risk of accidents. At the same time, maintenance costs are reduced as they eliminate the need for extra equipment like scaffolds, ladders, or lifting platforms.

Protect your workers and your company from the distress and costs which result from preventable workplace accidents!

If you would like to find out more on how to prevent workplace accidents with perma lubrication systems, please go to www.perma-tec.com where you can download or order more informative literature free of charge.

 

10/18/2010 - Workplace Safet

 

It is this time of year again. You have to review and evaluate the present year and soon present objectives for 2011. If maintenance is very important in your company, you might want to check into workplace safety and accidental risks.

Observing workplace safety regulations is not easy when a lot of work force has been cut and maintenance teams are expected to do much more in less time. Statistics show that 20 percent of deadly accidents happen during maintenance work. A workplace accident not only means lost working time, lost production, compensation claims and costs, it can also damage your company's image.

With automatic lubrication systems from perma-tec you can drastically reduce maintenance runs. The systems are safe and easy to access as they can be remote mounted - away from dangerous lubrication points. You can exchange them at any time, even when the machines are running = less machine downtime. Your lubrication points receive just the right amount of lubricant which prevents contamination and falls caused by excess oil or grease dripping from lubrication points. Our brochure "Prevent Workplace Accidents" gives you many more examples and solutions for workplace safety.

But perma lubrication systems not only increase workplace safety. They also provide reliable, clean and precise lubrication to your lubrication points. This reduces production downtime caused by bearing failures and increases economic efficiency.

perma products are being used in all types of industries world wide for automatic single- and multi-point lubrication.

For more details on workplace safety please go to http://www54.jimdo.com  for a free download our brochure "Prevent Workplace Accidents!".

                                                           

 

09/01/2010 - perma FUTURA - NEW

 

perma-tec has created a new flyer for perma FUTURA which you can look at or download here.
From our  perma Online Shop you may order flyers free of charge.

 

 

 

 

 

05/03/2010 - perma NOVA

 

  If you have ever used an electrochemical lubrication system, you know the effect that fluctuating ambient temperatures have on the discharge and the discharge period. perma-tec, the leading manufacturer of single-point lubrication systems, introduces its newest invention – the perma NOVA. perma NOVA has many great advantages. It offers continuous, temperature independent lubrication and lubrication periods from 1 to 12 months. It is also ex-proof certified and extremely user friendly. We optimized our field approved and successful electro-chemical drive by adding another component. This new component automatically off-sets any temperature fluctuations. For operators this means that perma NOVA can be used for applications that require dependable and optimized lubrication especially in areas with considerable temperature variations like in the food industry. The innovative control unit allows the user to select and easily program discharge periods from 1 to 12 months. And selected discharge periods can quickly be changed at any time in order to meet current lubrication requirements. Its reliable function at temperatures ranging from -20 °C to +60 °C ( -4 °F to +140 °F) makes perma NOVA ideal for the lubrication of belt conveyors, electric motors and chains. It is quickly installed, programmed and can be exchanged at any time. perma NOVA will increase equipment reliability and minimize maintenance runs. It also increases workplace safety as it reduces the time that maintenance workers have to spend in dangerous areas. All of this leads to a significant reduction of maintenance costs.

 

 

If you wish to make an appointment, please contact

 

Knipper & Co. GmbH
An der Römerbrücke 12
66121 Saarbrücken

Telefon: +49 (0)681 66509-0
Telefax: +49 (0)681 6650999
E-Mail: info @ knipper.de
URL: http://www54.jimdo.com

URL:http://www.lubricators.de

Vertretungsberechtigte: Oliver Knipper, Thomas Knipper

HRB: 5756

USt-IdNr. 138 161 446

Bankverbindung: Deutsche Bank Saarbrücken

 

 

 

 

 

 

 

 

 

 

 

 

02/03/2009 - Important Customer Information

We strongly disassociate ourselves from these companies!


The following companies are promoting their products using the name perma. They have no authorisation from perma-tec to do so and they are not selling original perma products.

 

Knipper & Co. GmbH
An der Römerbrücke 12
66121 Saarbrücken

Telefon: +49 (0)681 66509-0
Telefax: +49 (0)681 6650999
E-Mail: info @ knipper.de

 

Original perma products can be trusted. Only perma has over 40 years of experience in the development of single-point lubrication systems. With over 40 million lubrication systems sold worldwide, perma is a guarantor for quality, technology and know-how.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

01/01/2009 - New Products: PRO / PRO C MP-2

 

The new perma PRO C MP-2 offers automatic, safe, reliable and sufficient lubrication for two lubrication points. You may choose between two versions: The battery operated PRO MP-2 or the PRO C MP-2 with PLC connection.
 
perma PRO MP-2 is very suitable for lubrication points that require small lubricant amounts per discharge. Main applications are roller and sliding bearings of electric motors, fans and pumps.
The system comes as a Plug&Play solution and is immediately ready to use. Depending on the application, you may oder the MP-2 distributor either with the battery operated drive perma PRO, or the machine controlled drive perma PRO C. The perma PRO MP-2 can be retrofitted on any existing machine in your production process.
 

 

 

 

 

 

 

10/17/2007 - CEMENT-LIME-GYPSUM article about perma automatic lubrication systems.

 

The fundamental criterion for the profitability of a cement plant is problem-free process safety of machines and systems. However, plant owners constantly face challenges posed by varying weather and extreme ambient conditions. Trouble-free operation of the mechanical equipment can only be assured if all lubrication points are permanently supplied with the correct lubricant in adequate quantity and quality. All around the world, automatic lubrication systems have proved to be a suitable means of assuring operational reliability while simultaneously improving occupational safety.

If you are interested in the complete article please send an email to info @ knipper.de - and you will receive the 5 page article in pdf format.

 

 

 

 

 

 

 

 

06/25/2007 - Free download - perma SELECT Version 3.4  


The software "perma SELECT" will assist you in selecting the ideal lubrication system for a certain application. The software is based on theories for calculating correct lubrication for roller and sliding bearings and chain drives (currently considered as valid).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

03/13/2007 - perma MINI

FREE SAMPLE perma MINI!

perma MINI is a small single-point lubrication system. It has all the advantages of fully automatic lubrication and can be installed in any position wherever lubrication is required e.g. on bearings, pumps, compressors, transport equipment etc. perma MINI provides lubrication points with reliable, clean and precise lubrication.This permanent lubrication not only ensures trouble-free operation, it also reduces the risk of accidents drastically. Since maintenance intervals can be planned it also saves time.
perma MINI contains 20cc of our multi-purpose grease SF01 and will supply lubricant to your lubrication point for one month.
If you are satisfied with the lubrication result of perma MINI, you may continue lubricating your lubrication points with any of our other automatic lubrication systems.
Go toinfo @ knipper.de and order your free sample now!

 

Keep up to date with our Newsletter!

Newsletter
Newsletter

Would you like to always have the newest product, sales and marketing information?

Then sign up for our free perma newsletter.