perma PRO C MP-6

The user can select LC unit sizes 250 cm³ and 500 cm³. Each perma PRO can be programmed for lubricant discharge in days, weeks or months, up to a maximum dispensing period of 24 months. The MP-6 distributor supplies up to 6 lubrication points directly without pressure loss (max. 25 bar) and enables the use of tube extensions up to a length of 5 m. perma PRO C MP-6 can also be operated in IMPULSE mode. The impulse for a lubricant discharge can be PLC controlled. Power is supplied via the machine and can be PLC monitored and controlled.

 

      

 

Applications

perma PRO C MP-6 is suitable for the lubrication of roller- and sliding bearings, linear guides, open gears, spindles, motor shaft seals, generators, pumps, fans and linear guide systems (with same size runner blocks) in robots. Applications can be found in all types of industries: from steel to paper, heat and power stations, from mining to automotive.

 

     

Product characteristics

Setting via push button with display and LED

Outlet display
LED red/green = function

  • - Easy configuration of discharge period and outlets
  • - Display of remaining volume and active outlets
  • - Status control on display
  • - Easy to set and change at any time

MP-6 distributor with 6 outlets – Number of active outlets can be user-defined

  • - Supply of 1 to 6 lubrication points with same lubricant amount
  • - Precise supply of lubrication points
  • - Monitoring of lubrication point status

Pressure build-up to 25 bar allows remote mounting up to 5 m per outlet

Additional discharge (purge)

  • - Installation outside of dangerous areas or at easy-to-reach places increases workplace safety and saves time
  • - Higher equipment availability, since exchange during running operation possible
  • - Lubrication point can be purged to clear blockages

Technical Data

  • Drive
    Electromechanical
  • Power supply
    External: 15–30 V
  • Housing
    Metal / Transparent plastic
  • Discharge period
    1 day to 24 months
  • Lubricant volume
    250 cm³, 500 cm³
  • Operating temperature
    -20 °C to +60 °C
  • Pressure build-up
    25 bar
  • Number of outlets
    1 - 6
  • Lubricants
    Grease up to NLGI 2
  • Max. tube lengths
    5.00 m
  • Impulse controlled
  • CE

 

Part numbers

perma PRO C MP-6
Description Art. No.
perma PRO C MP-6 Basic system 
(with Cable PRO C M12 5 m)
106922
perma PRO C MP-6 Basic system 
(with Cable PRO C M12 10 m)
 106938
perma PRO LC 250
Description Art. No.
perma Multipurpose grease SF01 106639
perma Extreme pressure grease SF02 106641
perma High temp. grease SF03 106642
perma High performance grease SF04 106644
perma High temp. / Extreme pressure grease SF05 106645
perma Liquid grease SF06 106646
perma High speed grease SF08 106647
perma Multipurpose bio grease SF09 106648
perma Food grade grease H1 SF10 106649
Cover for PRO LC 250 106959
perma PRO LC 500
Description Art. No.
perma Multipurpose grease SF01 106753
perma Extreme pressure grease SF02 106754
perma High temp. grease SF03 106755
perma High performance grease SF04 106757
perma High temp. / Extreme pressure grease SF05 106758
perma Liquid grease SF06 106759
perma High speed grease SF08 106760
perma Multipurpose bio grease SF09 106761
perma Food grade grease H1 SF10 106762
Cover for PRO LC 500 106960