Simrit Rod Seals

U-Ring 0214

                                                     Merkel U-Ring Seal Set 0214

  • Single acting rod seal for use in hydraulics and pneumatics
  • Low friction due to fabric reinforcement
  • Large range of dimensions
  • Protection against extrusion through activated back-up ring
  • Low deformation value (not suitable for sealing systems)
  • Easily installed in  non-axial housings
  • From 100 mm diameter

U-Ring 0216

                                                    Merkel U-Ring Seal Set 0216

  • Single acting rod seal for use in hydraulic and pneumatics
  • Low friction due to fabric part
  • Large range of dimensions
  • Protection against extrusion through activated back-up ring
  • Low deformation value (not suitable for sealing systems)
  • Easily installed in non-axial housings
  • From 100 mm diameter

Chevron Seal ES

                                                    Merkel Chevron Seal Set ES

  • Seal set for robust operating conditions, mainly for provision  of spare parts to old plant
  • Proven under extreme conditions
  • Long service life
  • Can be optimally adjusted to the related application
  • Functions over a certain time period even with poorer surfaces
  • For application and design related reasons fluctuations in the leakage behaviour and friction behaviour are to be expected

Chevron Seal-ESV

                                                   Merkel Chevron Seal Set ESV

  • Seal set for robust operating conditions, mainly for provisions of spare parts to old plant
  • Proven under extreme conditions
  • Long service life
  • Can be optimally adjusted to the relatedapplication
  • Functions over a certain time period even with poorer surfaces
  • For application and design related reasons fluctuations in the leakage behaviour and friction behaviour are to be expected

Hat Seal H MF

                                                  Merkel Hat Seal H with Spring

  • Single acting rod seal for less important applications and spare parts requirements. We recommend more modern series for new designs

Hat Seal H OF

                                                  Merkel Hat Seal H without Spring

  • Single acting rod seal for less important applications and spare parts requirements. We recommend more modern series for new designs

Compact Seal KI 310

                                                  Merkel Compact Seal KI 310

  • Single-acting rod seal for standardised housings, amongst others, according to ISO 5597
  • Very goos static and dynamic tightness
  • Compact compression, higher surface roughness in the groove base is permitted
  • Designed for radially restricted housings

Compact Seal KI 320

                                                  Merkel Compact Seal KI 320

  • Single-acting rod seal for heavy duty applications, dimensions for standardised housings, amongst others, according to ISO 5597
  • Very good static and dynamic tightness
  • High pressure and larger gap with permissible
  • Compact compression, higher surface roughness in the groove base possible
  • Additional sealing edge prevents ingressof dirt to a large degree
  • Low deformation value, use in combination with single acting wipers recommmended

U-Ring LF 300

                                              U-Ring LF 300

  •   Very good static and dynamic tightness
  • Low friction, smooth movement even at low running speeds, dynamic deformation value
  • Use as an individual seal or secondary seal in sealing systems possible

U-Ring NI 150

                                                     Merkel U-Ring 150

  • Single-acting rod seal, for applications such as standardised housings according to ISO 5597 preferably for spare parts requirements

U-Ring NI 250

                                                      Merkel U-Ring NI 250

  • Single-acting rod seal for medium loads, predominantly for spare parts requirements

U-Ring NI 300

                                                    Merkel U-Ring NI 300

  • Single-acting rod seal for standardised housings, amongst others, accordingly to ISO 5597
  • Very good static and dynamic tightness
  • Additional sealing edge, prevents ingress of dirt to a large degree
  • Recommended for use in combination with single-acting wipers

U-Ring NI 400

                                                        Merkel U-Ring NI 400

  • Single-acting rod seal for medium loads, predominantly for spare parts requirements

Rod seal that is especially used within a sealing system 
Examples of use: Injection moulding machines, control units, marine hydraulics, presses, rolling mills, earth-moving equipment, floor conveyors, agricultural machines, truck loading cranes 

Omegat OMS-MR PR

                                                Merkel Omegat OMS-MR PR

  • Can be exchanged with operating environments of the Merkel Omegat OMS-MR Series
  • Increased operating reliability of sealing systems with demanding operating parameters (no continuously pressure build-up in gap area)
  • Extended service life of sealing systems by long-tern stability (reduced loading of the sealing system by minimised friction and wear).

Omegat OMS-S

                                                 Merkel Omegat OMS-S

  • Merkel Omegat OMS-S is designed especially for larger diameters and heavy dusty hydraulic applications
  • Very high resistance to pressure
  • Very good extrusion resistance
  • Designed prevents twisting
  • High contact pressure due to elastomer profile ring
  • High resistance to abrasion
  • Low friction, free of stick-slip

Omegat OMS-S PR

                                            Merkel Omegat OMS-S PR

  • Replaceable for operating environments of the Merkel Omegat OMS-S series
  • Increased reliability of sealing systems under demanding operating parameters (no continuous pressure build-up in gap area)
  • Extended service life of sealing systems by long-term stability (reduced loading of the sealing system by minimised friction and wear).

Compact Seal S 8

                                             Merkel Compact Seal S 8

  • Compact rod seal, also for standardised housings according to ISO 5597
  • Easy to fit
  • Excellent sealing effect also in the lower pressure range
  • Low friction due to the fabric part

U-Ring Syprim SM

                                               Merkel U-Ring Syprim SM

U-Ring T20

                                                    Merkel U-Ring T 20

  • Single-acting rod seal for standardised housings, amongst others, according to ISO 5597
  • Very suitable as a secondary seal with a sealing system
  • Good media resistance
  • Wipe operating temperature range
  • Very good static and dynamic tightness
  • Low breakaway force (in comparison to compact seals or U-ring with secondary sealingedge in corresponding material)
  • Dynamic deformation value

U-Ring T22

                                                      Merkel U-Ring T 22

  • Single-acting rod seal, also for standardised housings according to ISO 5597
  • Highly wear-resistant
  • Good media resistance
  • Wide operating temperature range
  • Very good static and dynamic tightness (NOTE: How deformation value, therefore not suitable for sealing systems)

U-Ring T 23

                                                    Merkel U-Ring T 23

  • The Merkel U-Ring T 23 is mainly used with high pressures and is designed for housings according to ISO 5597
  • Bridges large gaps even with high pressure
  • Wide operating temperature range
  • Very good static and dynamic tightness
  • High resistance to wear

U-Ring T 24

                                                  Merkel U-Ring T 24

  • Single-acting rod seal especially for telescopic cylinders and radially restricted housings
  • Very good static and dynamic tightness
  • Additional sealing edge prevents ingress of dirt to a large degree (*NOTE: Low dynamic deformation value, therefore not suitable for sealing systems)

Compact Seal TMFI

                                             Merkel Compact Seal TFMI

                         Rod seal for lower pressure range with properties of:

  • Low friction
  • Low housing height

U-Ring TM 20

                                               Merkel U-Ring TM 20

  • Single-acting rod seal for hydraulic cylinders
  • With new production technology even special sizes can be manufactured quickly and flexibly
  • Good media resistance
  • Wide operating temperature range
  • Very good static and dynamic tightness
  • Use as an individual seal or as a secondary seal in sealing systems possible
  • Large range of dimensions
  • No moduling tools

U-Ring TM 23

                                                    Merkel U-Ring TM 23

  • To meet the requirements of a higher radial deflection and larger gap bridging the Merkel U-Ring TM 23 has been fitted with an increased pre-load and active back up ring. The second sealing edge provides extra protection against the ingress of  dirt particles
  • Good media resistance
  • Very good static and dynamic tightness
  • Large range of dimensions
  • Bridges large gaps
  • Highly wear-resistant

U-Ring TMP 20

                                               Merkel U-Ring TMP 20

  • Rod seal for heavy-dity pneumatic stresses and strains and high operating requirements. New production technology allows special sizes to be manufactured quickly and flexibly. The Merkel U-Rings are designed for pressure on one side
  • High tightness
  • Suitable for dry air
  • Large range of dimensions
  • No mould tools required

Rod seals V-Packing V 1000

                                                  Merkel V-Packings V 1000

  • Merkel V-Packings are used for sealing piston rods, plungers and in exceptional cases of pistons
  • With their robust design they are very suitable for use in highly demanding, heavy and horizontal  compressors, particularly if the plungers are subject to large side forces.
  • V-packings can even be used if piston rods or plungers cannot be correctly used because of wear