Simrit Redial Seals

Simmerring Radiamatic®EWDR made of PTFE

 

Pressure-relieved Simmerring with a pressure ring made of PTFE compound, a
stainless steel clamping ring and an
O-ring (FKM) as a secondary seal


Simmerring Radiamatic®HTS II made of PTFE

 

Simmerring for open housings. Significantly reduced lip pre-load compared to
conventional geometries with high level
of protection against leaks


Simmerring Radiamatic® R35

 

Simmerring with a fabric reinforced static
part that is securely joined to the elastomer sealing lip. The sealing lip is also
pre-loaded with a garter spring.


 

Simmerring Radiamatic® R36

 

Simmerring with a fabric reinforced static
part that is securely joined to the elastomer sealing lip. The sealing lip is also
pre-loaded with a garter spring.


Simmerring Radiamatic® R37

 

Simmerring with a fabric reinforced static
part that is securely joined to the elastomer sealing lip. The sealing lip is also
pre-loaded with a garter spring.


Simmerring Radiamatic® R58

 

Simmerring with a fabric reinforced static
part that is securely joined to the elastomer sealing lip. The sealing lip is also
pre-loaded with a garter spring.


Simmerring Radiamatic® R35 LD

 

Simmerring with a fabric reinforced static
part that is securely joined to the elastomer sealing lip. The sealing lip is also
pre-loaded with a garter spring.


Simmerring Radiamatic® RS 85

 

Self-holding Simmerring made from two
functionally suitable elastomer components and an integrated steel strip. The
tension springs support the radial contact
pressure on the shaft.