Merkel Radial Seals

 

PRODUCT DESCRIPTION

Simmerrings with a fabric reinforced static part that is securely joined to the elastomer sealing lip. The sealing lip is also preloaded with a garter spring.

Simmerring Radiamatic® R35

 

 

 

 

PRODUCT DESCRIPTION

Simmerring with a fabric reinforced static part that is securely joined to the elastomer sealing lip. The sealing lip is also preloaded with a garter spring.

 

PRODUCT ADVANTAGES

Sealing ring is used, in case of adequate lubrication by the medium to be sealed, preferably where shafts pass through walls in mills and large gearboxes in heavy machinery manufacture.

  • Particularly robust static part
  • Lasting radial contact pressure
  • Highly wear-resistant

Simmerring Radiamatic® R36

 

 

 

 

 

PRODUCT DESCRIPTION

Simmerring with a fabric reinforced static part that is securely joined to the elastomer sealing lip. The sealing lip is also preloaded with a garter spring.

 

PRODUCT ADVANTAGES

Sealing ring is used, in case of adequate lubrication by the medium to be sealed, preferably where shafts pass through walls in mills and large gearboxes in heavy machinery manufacture.

  • Particularly robust static part
  • Lasting radial contact pressure
  • Highly wear-resistant
  • With design measures, e.g., metal support for the sealing lip, higher pressures are possible
  • Overpressure requires the usage of endless seals
  • Back-up ring drawings and installation instructions for open seals are available

 

Simmerring Radiamatic® R37

 

 

 

 

 

 

PRODUCT DESCRIPTION

Simmerring with a fabric reinforced static part that is securely joined to the elastomer sealing lip. The sealing lip is also preloaded with a garter spring.

 

PRODUCT ADVANTAGES

Sealing ring is used, in case of adequate lubrication by the medium to be sealed, preferably where shafts pass through walls in mills and large gearboxes in heavy machinery manufacture.

  • Particularly robust static part
  • Lasting radial contact pressure
  • Highly wear-resistant

 

Simmerring Radiamatic® R58

 

 

 

 

 

PRODUCT DESCRIPTION

Simmerring with a fabric reinforced static part that is securely joined to the elastomer sealing lip. The sealing lip is also preloaded with a garter spring.

 

PRODUCT ADVANTAGES

The sealing ring has a groove around the circumference to facilitate additional lubrication from the outside. The Simmerring Radiamatic R 58 was developed for the special requirements of grease-lubricated bearings in mill manufacture.

  • Particularly robust static part
  • Lasting radial contact pressure
  • Highly wear-resistant

 

Simmerring Radiamatic® RADI 35 (R35 LD)

 

Simmerring with a fabric reinforced static part that is securely joined to the elastomer sealing lip. The sealing lip is also pre-loaded with a garter spring.

 

 

Simmerring Radiamatic® RS 85

 

Self-holding Simmerring made from two functionally suitable elastomer components and an integrated steel strip. The tension springs support the radial contact pressure on the shaft.

 

 

HTS2-9535 | SIMMERRING RADIAMATIC® HTS II TYPE 9535 MADE OF PTFE

 

 

 

 

PRODUCT DESCRIPTION

Simmerring for open housings. Significantly reduced friction compared to standard geometries due to the patented sealing lip.

 

PRODUCT ADVANTAGES

  • Good dry running properties
  • Steam resistant
  • Good thermal conductivity
  • Electroconductive/antistatic
  • Type can be easily matched to housing
  • Suitable for water applications
  • Anti-adhesive

 

Simmerring Radiamatic®EWDR made of PTFE

 

Pressure-relieved Simmerring with a pressure ring made of PTFE compound, astainless steel clamping ring and an O-ring (FKM) as a secondary seal